top of page

FULLY EQUIPPED TO MEET YOUR NEEDS

MANUFACTURING CAPABILITIES

Our facility boasts 14,000 square feet of production space with 6 and 10 ton crane bays.

We are outfitted to offer services in the following areas:

WHY LASER CUT?

Since their introduction in the early 1960’s, laser cutters have been a game changer.  They are able to produce custom parts much faster and cheaper than other machining methods.  With no need for custom tooling to be made, a laser will save you money as well.  In addition to that, parts produced on a laser can be counted on for accuracy and precision.  

 

  • Precision Cuts

    • Kerf:  0.01”

    • Position Accuracy :  ±0.0004”/20”

    • Position Repeatability: ±0.004”

  • Clean Edges

    • Save your team from performing secondary cleaning operations on the parts

    • Professional look and feel

amada.png

LASER PROCESSING ABILITY

  • 2000 Watt Amada Pulsar 2415

  • Mild and high carbon steel up to 0.50”

  • Aluminum up to 0.187”

  • Stainless Steel up to 0.25”

  • Working Range within 60” x 120”

SHEARING ABILITY

  • Piranha P50 Ironworker

  • ¾” x 10” Flat Bar

  • 1-1/16” x 14” Flat Bar

  • 5” x 5” x ⅜” Angle

  • 1-½” Round Bar

  • 1” Square Bar

PUNCHING ABILITY

  • Piranha P50 Ironworker

  • 50 Tons

  • 1-1/16” DIA thru ½”

  • 13/16” DIA thru ¾”

COPING/NOTCHING ABILITY

  • 2-¾” x 4” x ¼”

Amada-LaserWEB.gif
Hyd-Mech-SawWEB.gif
Laser Cutting
Shearing
Punching
Coping/Notching
Welding
Shot Blasting
Painting
Saw Cutting

SAW CUTTING ABILITY

  • Hyd-Mech Series II

  • 12” thick x 18” wide at 90°

  • 12” thick x 10” wide at 45°


WELDING ABILITY

  • AWS D1.5 Welding Certification

  • Arc and Mig welding with hard-wire or flux core


SHOT BLASTING ABILITY

  • Small to Oversized Parts


PAINTING ABILITY

  • Titan Impact Spray System

  • Parts up to 15’ tall x 30’ wide and 60’’ long

POWDER COATING ABILITY

  • Wagner Prima Sprint Powder Coating System

  • Parts up to 3’ wide x 3’ wide x 6’ tall

POWDER COATING

At Mayhem Metalz we have set up a professional powder coating system from cleaning through spraying and baking of the part.  We use a 4-step cleaning process on all of the parts before we apply any powder coating to them.  The high quality powders we use come directly from the manufacturer.  This ensures that the colors will be uncontaminated and full of good paint properties, which is unlike companies that use cheap powders to save a buck.  Our professional spray system allows us to cover the parts correctly and to the desired mill thicknesses.  Additionally, parts in our ovens bake at consistent temperatures due to the high quality temperature control and air circulation systems within.

Piranha-IronworkerWEB.gif
bottom of page